WATWERNEXT MEXICO Y EXINTEX 2018 : tratamiento de aguas en la industria textil

WaterNext se enorgullece de participar en la 21ª EXINTEX que se celebra del 2-5 de octubre en el Centro de Exposiciones y Convenciones de la Ciudad de Puebla.

EXINTEX 2018 tratamiento de aguas en la industria textil

WaterNext se enorgullece en participar en la 21ª EXINTEX que se celebra del 2-5 de octubre en el Centro de Exposiciones y Convenciones de la Ciudad de Puebla. En esta feria convergen proveedores y compradores de diferentes partes del mundo interesados en el sector textil.

Gracias a la tecnología y el “know how” que WaterNext a desarrollado y experimentado a lo largo de más de 30 años en el sector, es posible resolver los problemas y retos que representa el tratamiento de aguas residuales y su recuperación en procesos.

Nuestro equipo de expertos a desarrollado proyectos integrales y personalizados a empresas mexicanas e internacionales instaladas en territorio nacional que producen mezclilla, gabardina, camisería, calcetines, hilatura de costura, entre otros. También han realizado proyectos en diferentes países del mundo donde las exigencias gubernamentales en materia de aguas prohíbe la descarga de aguas residuales, por lo que estos proyectos recuperan más del 95% del agua en sus procesos.

Los contaminantes que resultan de procesos textiles en las descargas de aguas residuales son removidos principalmente con sistemas biológicos de diferentes tipos, los cuales tienen costos operacionales muy bajos en comparación con los sistemas fisicoquímicos, alta eficiencia y cumplimiento de normatividad aplicable como NOM-001-SEMARNAT o declaratoría de ríos más rigurosas, así como parámetros internacionales.

Para cada proyecto se realizan análisis de datos, área de construcción, calidad de agua y normatividad aplicable con el fin de proponer un proyecto viable y duradero. Los resultados de cada análisis se toman en cuenta para el dimensionamiento de sistemas como:

  • Tratamiento Biológico
  • Sistema MBR
  • Plantas de descarga cero y recuperación de aguas residuales
  • Sistemas fisicoquímicos
  • Entre otros

Como sistemas ambientales complementarios se desarrollan proyectos de:

  • Neutralización de aguas residuales alcalinas mediante humos de chimeneas
  • Recuperación de SOSA

Estos sistemas además de mejorar las condiciones del agua residual para su posterior tratamiento generan ahorros representativos en el consumo de químicos como el acido sulfúrico en el caso de la neutralización del agua y la recuperación de SOSA caustica en los procesos productivos de la fábrica.

Para conocer más sobre los diferentes sistemas y tratamientos que WaterNext ofrece navega por la página web o visítanos en los stands 706-811 de la EXINTEX .

Más notas

Desarrollo de proyecto 100% biológico

Leer más

EXINTEX 2018 tratamiento de aguas en la industria textil

Leer más

Nuevo proyecto Cola de Lagarto

Leer más

Nuevo proyecto Fábrica San Martín

Leer más

 

PLM IMPIANTI – PRESENTE EN ITMA ASIA 2018

ESTIMADOS CLIENTES Y AMIGOS : 
De 15/10/2018 desde 19/10/2018 en National Exhibition and Convention Centre con ocasión del evento Itma Asia 2018, PLM Impianti estará en la Hall 06 Stand C48. Siguiendo la continua innovación, en nuestro Stand estaremos presentando la ultima tecnológica para la industria textil, NWT, textiles técnicos y para el sector de la automoción. Esperamos su visita en nuestro stand para descubrir una nueva generación de máquinas inovadoras.
Estarán a su disposición:
• Luca Ravasio – Managing Director        (luca@plmimpianti.com / +39 335 6345936)
•Renzo Colombino–Sales Manager  (r.colombino@plmimpianti.com / +39 331 7962896)

LOS ESPERAMOS !!!

Mahlo showcases straightening and process control systems at EXINTEX2018 ( 02.10 -05.10 )

                  EFFICIENCY AND QUALITY ARE MAIN GOALS

Mahlo showcases straightening and process control systems at Exintex

No matter of textile, knitwear or leather: at the Exintex show in Mexico all important branches of the textile industry will come together from 2 to 5 October. The competent audience from all around the world can gather information from Mahlo GmbH + Co. KG at booth 706-711 on how they can get the most out of their production processes.

Area Sales Manager Miguel Lessel, who welcomes visitors at the joint booth with Blutec and Tecnoeuropa, knows the special challenges for the Central American market well: “The climate for textile producers has not always been friendly. Especially the cheaper competition from Asia has bothered the sector.” But for the past several years one could see an upward trend. “To pull ahead of the competitors, producers strive to be more efficient and quality oriented. 

Mahlo offers the right solutions to fulfill these goals. The automatic weft straightener Orthopac RVMC-15 detects and eliminates warping on running web with speeds up to 250 meter per minute. For production that means less rejects and therefore lower costs. End user in return gets high-quality products. Contributing to that is also the Famacont PMC for control of weft thread and course density. People interested can hear all about the operating principle with the help of a demo tower and different web samples at the Mahlo booth. Another big topic at Exintex is process control. The modular system Optipac VMC optimizes drying or fixing processes as well as the processes all around the stenter. Translated to the service life of a stenter, the energy costs amount to roughly 10 million euro. With the right straightening ad control technology, up to 30 % of this sum can be saved. The Mahlo team is looking forward to find the best solutions together with their clients.

Image

LAWER al Tire tecnlogy Expo – Hannover 2019

LAWER al Tire tecnlogy Expo - Hannover 2019

 “LAWER è lieta di annunciare che sarà presente Tire tecnlogy Expo 2019 ad      Hannover dal 5 al 7 marzo.”

MORE NEWS – LAWER 

Marangoni e Lawer insieme per l’innovazione : 

Marangoni e Lawer insieme per l’innovazione

Nuova tappa nel processo di ammodernamento del reparto mescole all’interno dello stabilimento Marangoni di Rovereto

 “Il Gruppo Marangoni è tra i principali operatori a livello mondiale nel settore della ricostruzione degli pneumatici “

Nel 2015 era stato installato un mescolatore Intermix dotato di rotori compenetranti a distanza variabile; ora è la volta di una nuova unità per la dosatura automatica ‘Supersincro’, di ultima generazione, fornita dalla biellese Lawer.

Il completamento di questo investimento – afferma l’azienda – permetterà di innalzare ulteriormente gli standard qualitativi e la precisione di un sistema di mescolatura all’avanguardia a livello nazionale e internazionale.

“Il settore del pneumatico industriale è caratterizzato dal continuo emergere di nuove esigenze da parte degli utilizzatori finali e da una notevole velocità dell’evoluzione tecnologica – commenta Gianluca Merlo, Direttore Operations Italia di Marangoni -. Questo nuovo salto generazionale per la sala mescole di Rovereto eleverà ulteriormente il livello qualitativo garantito dal nostro stabilimento. L’investimento dimostra inoltre, ancora una volta, come Marangoni rappresenti un riferimento per società orientate all’innovazione dei processi produttivi come Lawer, che mirano a realizzare progetti di altissimo valore tecnologico”.

Fondato nel 1947 a Rovereto (TN), il Gruppo Marangoni è tra i principlai operatori a livello mondiale nel settore della ricostruzione degli pneumatici e nello sviluppo di tecnologie e macchinari per la produzione di pneumatici nuovi e ricostruiti, con 10 stabilimenti e 1.300 dipendenti in tutto il mondo.

KARL MAYER NEWS

An exhibition full of future opportunities !!!

Digitalisation and sustainability – the top themes of KARL MAYER’s presentation at ITMA ASIA + CITME, 15.–19.10.2018, stand B 11, hall 4, in the National Exhibition and Convention Center in Shanghai

KARL MAYER will be presenting its latest innovations at ITMA ASIA + CITME, which will be held from 15 to 19 October 2018. This global player is using its latest developments to tackle the changes taking place in the world today.

“The mega trends of digitalisation and sustainability are changing the world as we know it. As an innovative global market leader, we see these changes as an opportunity for our customers. At ITMA ASIA+ CITME, we will be showing our visitors how KARL MAYER is implementing these strategic themes, digitalisation and sustainability by delivering integrated solutions offering a wide range of advantages,” says KARL MAYER’s Managing Director, Arno Gärtner.

KARL MAYER can be found in the Exhibition and Convention Center in Shanghai on stand B 11, hall 4, where a new umbrella brand will be launched, offering innovative digital solutions known as the KARL MAYER Digital Factory, which was introduced last year. A look at KARL MAYER’s CLEANER.PRODUCTIONS will also be on the cards. Other highlights include a performance show of the latest generation of machines, a fashion show showcasing decorative, trendsetting fabrics, and a presentation of the Technical Textiles centre of excellence. An in-house show at KARL MAYER (CHINA) in Changzhzou will also be held at the same time as the fair, scheduled for 15 to 18 October.

Development of the best digital solutions

As a pioneer in textile machinery building, KARL MAYER is following a broad digitisation strategy. An important element of this strategy is to support its customers with new digital solutions at a market leader level.

The initiatives for this strategy are being coordinated by Antonia Gottschalk, the Head of Digitisation. The expertise for doing this is based on an efficient network. Since March 2018, KARL MAYER has been part of ADAMOS, an alliance made up of industrial and software companies. At the end of 2017, KARL MAYER also set up its own start-up company in Frankfurt, known as the Digital Factory, for developing new, innovative digital business models, products and services. In future, these will be combined under a new umbrella brand, which is being launched at ITMA ASIA + CITMA. “Management is focusing on the KM Digital Factory. Together with our involvement in ADAMOS, the new company will enable us to quickly make the best digital solutions available for delivering maximum benefit to our customers,” says Arno Gärtner.

Networked machines

Knowing what is going on and being informed at all times, regardless of where we are – mobile digital solutions have been making inroads into out daily life for many years now and, have changed our perception of what is current.

For the first time, KARL MAYER will present its own solution for networking its machines. This digital solution will provide its customers with transparency in real time regarding the performance of their machines, and can be used in the company’s own network with very little modification.

Integrated sustainability

“We care about your future” is what KARL MAYER is all about. Its philosophy is to take responsibility also for future generations. What KARL MAYER is doing to promote sustainability will be on show at the fair and on the internet at www.CLEANER.PRODUCTIONS.

The environmental aspects of this include the LEO® Low Energy Option, which should enable energy consumption during machine operation to be reduced by between 9.5 and 13 %, depending on the type of machine. Costs and CO2 emissions should be reduced at the same time.

Intelligent, end-use-applicable concepts should also reduce environmental loads, as a technology transfer project being carried out by the central government and regional authorities in Wujiang Shengze, China, is demonstrating. One of the aims of this project is to replace the environmentally harmful looms in this industrial area with KARL MAYER’s warp knitting machines offering a comparable product portfolio. The TM 3, with its broad product portfolio, is a particularly good alternative. This tricot machine will be shown in operation at the exhibition, together with examples of its uses.

KARL MAYER will be showing the TERRY.ECO concept for the environmentally friendly production of terry goods, the core element of which is the TM 4 TS-EL machine. Depending on the type of product being produced, this cotton terry warp knitting machine can produce up to 250 % more fabric and consumes approximately 87 % less energy per kg of textile than air-jet looms. Sizing can be dispensed with, which reduces energy, water and effluent loads. The TM 4 TS-EL will be on show at KARL MAYER’s in-house show in Changhzou.

With its PROSIZE® sizing machine, KARL MAYER is offering weaving companies involved in the production of terry goods a sizing machine based on the concept of sustainability. With this machine, the sizing agent is applied by a highly efficient, intelligent process. Compared to conventional methods, this reduces the consumption of sizing agents by up to 10% and reduces bath volumes. A reduced size consumption also means less energy consumption when preparing the chemicals and for desizing. Also, less effluent is produced. The core element of the PROSIZE® system, the VSB Size Box, will be on show in Shanghai.

The latest generation of machines

For the first time, the widest high-speed tricot machine in the world, the HKS 3-M, 280″, will be demonstrated to the public in operation at the exhibition. This new machine delivers maximum flexibility for the usual product repertoire. Unlike previously, articles of different widths and also more fabric webs can be produced simultaneously on just one machine. The unique performance of this machine will be demonstrated as it produces a velour fabric in a gauge of E 32.

The first TM model with KAMCOS® 2 facility is also being showcased. KARL MAYER’S TM 3, 186″, equipped with the next generation of the KARL MAYER Command System, retains the tried-and-tested features of the HKS version. These include an operator interface with functions based on smartphone technology and an integrated laser stop system as well as data access via mobile devices using the KARL MAYER CONNECT app. In Shanghai, this efficient, flexible production machine will be producing a tough fabric in a gauge of E 32 with ecological benefits. This textile can be used as a substitute for fabrics produced by water-jet weaving, with its high effluent loads.

For the warp preparation sector, KARL MAYER will also be showing the innovative VSB Size Box at the fair. Instead of the usual immersion and bath application process, the Prosize® operates with three, highly turbulent, homogeneous application zones, spray bar technology and a subsequent application/squeeze roller system. This reduces the volume of the size bath and sizing additives, thus decreasing the environmental loads. Other benefits include an extremely uniform size film and less fibre dust – guaranteeing maximum weaving efficiency – and a 20% larger yarn coating zone.

KARL MAYER will also be showcasing the ISODIRECT direct warping machine – a world first with a unique cost:benefit ratio. This all-round machine can process every type of staple-fibre yarn and produces high-quality beams at warping speeds of up to 1,000 m/min-1.

Textiles with trendsetting features

This demonstration of KARL MAYER’s technology and strategies will be complemented by a presentation of the wide range of applications of warp-knitted fabrics. Seductive lace, high-performance fabrics for sportswear, original creations for athleisure wear, and apparel fabrics with a certain pizzazz – KARL MAYER’s textile innovations show the wide variety of warp-knitted textiles available and are setting the trend in every sector.

Building on textiles

KARL MAYER has the right technology and expertise to cater for a wide range of applications in the technical textiles sector. The company’s weft-insertion, biaxial and multiaxial warp knitting machines can be found in the plants of manufacturers of inlays, tarpaulins and advertising substrates, as well as in those of producers of geogrids, composites and automotive fabrics. The focus of the exhibition at ITMA ASIA + CITME will be on textiles for the construction sector. The Chinese construction sector is one of the growth areas in the country but, unlike the construction industries in Europe and America, for example, the Chinese building industry focuses on conventional materials. Textiles can offer the construction sector many advantages, especially when used in concrete components. By replacing conventional steel reinforcements with carbon- or glass-fibre textiles, the amount of concrete used can be reduced by up to 70%. Other promising applications for warp-knitted structures are in tear-resistant plaster grids for increasing the tear resistance within the plaster, self-adhesive tape for repairing holes and cracks in walls, cost-effective, flexible roof canopies and bitumen roofing materials with excellent mechanical properties. Examples of these types of textiles will be used to illustrate the advantages of warp-knitted building textiles during the exhibition.

An in-house show with exclusive machines

KARL MAYER (CHINA) is sending out invitations to attend an in-house show with performance demonstrations of selected machines for the Chinese market from 15 to 18 October in Changzhzou.

The new COP 5 M-EL, 180″ five-bar tricot machine will be unveiled to the public for the first time in Changzhzou. This machine will be producing a shoe fabric in a gauge of E 20, just one of the fabrics in its extensive production repertoire. The electronic guide bar control facility and five guide bars make the machine extremely flexible.

A new machine will be representing the RD machine series at the in-house show. This new model is part of the RD 7 series and puts the emphasis on speed. This high-speed machine will be producing a shoe fabric at the in-house show in a gauge of E 22, and will be demonstrating a speed that has never been achieved before.

KARL MAYER’s TM 4 TS-EL is a versatile terry warp knitting machine for processing cotton. In Changzhou, the TM 4 TS-EL, 186″ will be producing a double-face fabric in a gauge of E 28 with fluffy micro-fibres on the outside and absorbent cotton on the inside. Its technology makes this machine an environmentally friendly alternative to looms.

From its range of warp preparation equipment, KARL MAYER will be showing a LONG CHAIN BEAMER (LCB) and a BALL WARPER (BW) for processing denim, especially for rope dyeing. The efficiency of the LCB may be up to 20 % higher than comparable machines, and the beams are of the highest quality. The BW produces high quality warp balls and guarantees maximum performance. KARL MAYER will also be showing the ISOWARP, a sectional warping machine with an excellent cost:benefit ratio for standard applications. Compared to similar machines on the market, the performance of this machine may be as much as 30 % higher in warp preparation, and weaving efficiency may be up to 3 % higher.

KARL MAYER MORE INFO AT ITMA ASIA & CITME

  • An exhibition full of future opportunities

    The latest generation of machines + Digitalisation and sustainability – the top themes of KARL MAYER’s presentation

    THE LATEST GENERATION OF MACHINES

    • HKS 3-M, 280” – The world’s widest tricot machine
    • TM 3 – The first TM model with KAMCOS® 2 facility
    • VSB Size Box – The innovative part of the PROSIZE® which reduces the volume of the size bath and sizing additives
    • ISODIRECT – a world first allround direct warping machine with a unique cost:benefit ratio for standard applications

    DEVELOPMENT OF THE BEST DIGITAL SOLUTIONS

    • LAUNCH OF A NEW UMBRELLA BRAND FOR DIGITAL SOLUTIONS
      As a pioneer in textile machinery building, KARL MAYER is following a broad digitisation strategy. An important element of this strategy is to support its customers with new digital solutions at a market leader level. 
      For the first time, KARL MAYER will present its own solution for networking its machines. This digital solution will provide its customers with transparency in real time regarding the performance of their machines, and can be used in the company’s own network with very little modification.

    INTEGRATED SUSTAINABILITY CONCEPT

    • CLEANER.PRODUCTIONS – environmentally friendly advantages of warp knitted textiles compared to other production methods
    • LEO – Low-Energy-Option
    • TERRY.ECO – Sustainability and the conservation of energy and resources when producing terry fabrics

    “We care about your future” is what KARL MAYER is all about. Its philosophy is to take responsibility also for future generations. What KARL MAYER is doing to promote sustainability will be part on show at the fair.

  • IN-HOUSE SHOW

    Special Event for registered visitors

    With its extensive range of products, the In-house Show is a must for the warp knitting sector, and it is an ideal opportunity for visitors to complement what will be on show at ITMA ASIA + CITME

    • NEW: COP 5-M -EL – fist live demonstration of the new five-bar trikot machine
    • NEW: RD 7 – new double-raschel which puts the emphasis on speed and operates with a optimized trick plates distance
    • TM 4 TS-EL – versatile terry warp knitting machine with an increased output
    • TMJ 4/1-T  – terry machine with jacquard
    • an efficient direct warping machine DS OPTO EC for every running length and application
    • LONG CHAIN BEAMER (LCB) and BALL WARPER (BW) for processing denim, especially for rope dyeing
    • ISOWARP – a sectional warping machine with an excellent cost:benefit

    Registration

    The registration is now open till 12th October. Only persons registered in advance have access to the In-House Show. 
    For additional information please email to 

    Register now

    How to get to the In-house Show:

    VIA BUS TRANSFER

    We offer a bus transfer from ITMA Asia (NECC / Shanghai) to KARL MAYER (China) and back.​

    • Meeting point: 11:45 AM at the KARL MAYER Booth (Hall 4 / B11) 
    • Leave 12:00 PM:  leave exhibition grounds for KARL MAYER China, arrival approx. 14:30 pm
    • Return 16:30 PM:  back to Shanghai Hongqiao, arrival approx. 19:00 pm
      After the bus returns back to Shanghai, the bus will let you get off close to station of metro line 2.

    BY YOUR OWN / SELF DRIVER

    Please come directly to KARL MAYER (China)​
    No.518 Changwu Road213166 Wujin District, Changzhou City, Jiangsu Province
    google maps / baidu

    Contact:

    For additional information please email to  or contact Chen, Juan directly 0086 519 86198847

REGISTRATION

KARL MAYER In-house Show
The registration will be open till 12th of October.

KARL MAYER – ITMA ASIA + CITME and an In-house Show 15. – 19. October 2018 / China

An exhibition and In-house Show full of future chances will be waiting for you.

At the upcoming ITMA ASIA + CITME to be held from 15. to 19. October 2018 at the National Exhibition and Convention Center in Shanghai, the world market leader will be present on Stand B 11, H 4, with an innovation show on the mega trends of our time.

Moreover, during the trade fair in Shanghai, KARL MAYER will invite its guests to take part in an in-house show at its plant in Changzhou. Here, the visitors will have the opportunity to see a performance show of the new COP 5 EL and many other market-oritented developments.

We are looking forward to your visit!

at ITMA ASIA + CITME In-house Show
15. – 19. October 2018
National Exhibition & Convention Center in Shanghai
Stand B 11, H 4 
15. – 19. October 2018
KARL MAYER China
Changzhou City / Wujin District